If link is lost on one of the connections, then the other link will be brought down by the media converter.
Smart Link Pass-Through: - (default up) - In this mode, the link state on one connection is directly reflected through the media converter to the other connection. Pause frames will not be acted upon or generated but will continue to be passed through. Settings of Link mode and Fiber fault alert will be determined by those switch settings. Off - Negotiation on both fiber ports will be disabled. Pause frame will not be acted upon or generated but will be passed through. Pause will advertise support for Symmetrical and Asymmetrical Pause. Switches - accessible through a side opening in the chassisĪuto (default up) - Fiber Negotiation is performed for both fiber ports. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received. This green LED is operational only when power is applied. The LED will blink slowly when in Loopback test mode. This green LED is turned on when power is applied to the media converter. The media converter can perform a loopback on each 1000Base-X fiber interface.ġ00-240v AC, regulated DC adapter included The media converter is transparent to 802.1Q VLAN tagged packets. The media converter is transparent to Pause frames. Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. Two or more media converters can be chained in a link to achieve even greater distances. Signal regeneration maintains signal integrity and allows for maximum fiber to fiber connections without degradation. Applies only when fiber auto-negotiation is disabled. This eliminates the possibility of lockouts that occur with some media converters. If the 1000Base-X transmitter is off as a result of this fault it will be turned on periodically to allow the condition to clear should the partner device on the 1000Base-X be using a similar technique. This provides fault notification to the partner device attached to the 1000Base-X interface of the media converter. With Fiber Fault Alert the state of the 1000Base-X receiver is passed to the 1000Base-X transmitter. This feature can be used whether fiber auto-negotiation is enabled or disabled. When the Link Mode switch is placed into Smart Link Pass-Through mode, the 1000BASE-X link on one port will reflect the state of the other 1000Base-X media converter port. The 1000Base-X fiber interfaces negotiate according to 802.3 clause 37.
S-1000MM Fiber to Fiber Features: 1000Base-SX to 1000Base-X Auto-Negotiation (802.3ab) Whether you need to extend multimode to multimode or multimode to single mode, Perle has an extensive range of S-1000MM Gigabit Fiber to Fiber Media Converters to meet your fiber conversion requirement.
#GIGABIT FIBER MEDIA CONVERTER FREE#
In addition, a lifetime warranty and free worldwide technical support make Perle's S-1000MM Gigabit Fiber to Fiber Media Converters the smart choice for IT professionals. This allows for more efficient troubleshooting and less on-site maintenance. Perle's advanced features make the end to end fiber link completely transparent. The F-GET-TR takes advantage of Gigabit Ethernet technology, suitable for transmission applications of larger bandwidth like Video, Image, and Voice over IP.Perle's feature rich S-1000MM Gigabit Fiber to Fiber Media Converters enable transparent fiber extension of 1000Base-SX multimode fiber to 1000Base-SX multimode or 1000Base-LX/EX/ZX/BX single mode fiber. Several converters can be simultaneously installed by using the F-CHAS 12-slot 19" rack-mount chassis. Their compact size allows the converter to be easily installed in any narrow desktop location or used in a wall-mount format to save space. This flexibility in cabling allows network managers to put fiber cables anywhere within a network without changing the arrangement of copper based Gigabit segments. These Thor converters are completely transparent when installed so your network performs exactly the way it was previously, but now it can migrate both copper and fiber mediums. Now, migration or expansion of existing networks can be possible with minimum cost and complexity. The Thor Fiber F-GET-TR media converters were specifically designed to offer network designers the tools for migration from copper based Gigabit to fiber based Gigabit Ethernet.
0 kommentar(er)
